• October 24, 2021
  • Last Update September 21, 2021 11:23 am
  • India

What if the computer has rebooted from a bug check?

When the system is restarting, then on the Blue Screen of Death (BSoD) the error appears ‘The computer has rebooted from a bug check. This error message appears after a normal restart. To identify the windows bug check error, it can be clarified using its source code. You will observe the error with a value of 0x0000007e, 0x00000133, 0x0000000a, and 0x000000ef.

Eventually, this kind of error comes up whenever you restart the computer. So, we are here to share how you can fix this computer reboot bug error easily. There are solutions to help you with this post that will make things easier. You will uncover the steps or fixes for this Bugcheck that are not available over the internet from other resources.

the computer has rebooted from a bugcheck

BSoD when the computer has rebooted from a bugcheck in Windows 10

The moment the BSoD problem occurs, it stays on the screen even before the PC restarts with no warning. To stop, such an issue needs to be disabled for the automatic PC restart from the StartUp & System Recovery settings. 

The error code can identify the problem. Follow the steps below to get the solution soon:

  • Disable the User Account Control settings. 
  • Open Control Panel and choose the System And Maintenance option.
  • Click on System and towards Advanced System Settings
  • Select the Advanced tab and under the Startup And Recovery option further look for the Settings button.
  •  Click on Clear the Automatically Restart check box 
  •  Press OK. Then enable the User Account Control settings.

Windows cannot recover on its own so it will cause a blue screen error issue. 

How can I fix the bugcheck BSoD error in Windows 10 when the computer has rebooted from a bugcheck?

Remove and uninstall devices and drivers

Remove and uninstall devices and drivers
  1. Press Windows Key + R.
  2. Search devmgmt.msc in the Run box and press OK to open the Device Manager.
  3. Search for the recently installed Device driver. Right-click and select the option to Uninstall Device.
  4. Close the Device Manager and reboot the computer.
  5. Check the errors again and further proceed with the steps.

Remove the peripheral devices if recently added to the computer. Uninstall the devices from the device manager.

Run a memory check for your computer

Run a memory check for your computer
  1. Press Windows key + R to open the Run window.
  2. Enter mdsched.exe and press Enter.
  3. Click on any option from Restart now and check for the problems before you start it again.
  4. Restart the computer if any of the issues persist again.

This error usually occurs due to a fault in the memory. It is advised to check the memory before performing the memory troubleshooting steps.

Troubleshoot Blue Screen Errors in Windows 10

Blue Screen Error or Stop Error is the system halt that causes a system crash when Windows 10 does not restart. The condition of bug check takes place where the operating system stops responding. 

In such a case, the users are left with two options, i.e., either they have to close the program or they have to wait for the program to respond again. Most often, users choose to close the program and they eventually lose the information and files that they were working on. Such kinds of warning messages are disheartening for a user. 

There are such errors that are prompted during the blue screen error issue. These are the errors that are the cause of the Blue Screen Errors:

  • CRITICAL_PROCESS_DIED.
  • SYSTEM_THREAD_EXCEPTION_NOT_HANDLED.
  • IRQL_NOT_LESS_OR_EQUAL.
  • VIDEO_TDR_TIMEOUT_DETECTED.
  • PAGE_FAULT_IN_NONPAGED_AREA.
  • SYSTEM_SERVICE_EXCEPTION.
  • DPC_WATCHDOG_VIOLATION.

While facing a blue screen error, use the System File Checker (SFC) and Deployment Servicing and Management (DISM) tool to repair the system files that are damaged that can solve the issue

Repair image files with DISM

To repair the available image files with DISM, follow the steps below:

  1. Click on the Start button.
  2. Search for Command Prompt, right-click the option, and select the Run as administrator option.
  3. Type DISM /Online /Cleanup-Image /RestoreHealth command to repair the Windows 10 image
  4. Press Enter.

The software tool downloaded will repair the images damaged in Windows 10.

Repair blue screen error with SFC

Follow the steps to repair the installation using the local image with the SFC command tool:

  1. Open Start.
  2. Search ‘Command Prompt’ , right-click to select the top result, and choose the ‘Run as administrator’ option.
  3. Type the command SFC /scannow to repair the installation of Windows 10 and press Enter.

SFC helps to repair the system files using the local image files to solve the blue screen error issue.

How to stop bug check windows 10?

How to stop bug check windows 10?

Sometimes Windows 10 restarts with a stop error caused by faulty drivers. There are Driver Verifier tools that provide options to troubleshoot the system. These include running drivers in an isolated memory pool, generating extreme memory pressure, and validating parameters. If the tool encounters errors in the execution of driver code, it proactively creates an exception to let that part of the code be examined further.

  • Select the driver names from a list if there are any “suspicious” drivers that can create a problem for Windows 10.
  • If the driver verifier detected crashes, create custom settings for verification on all third-party and unsigned drivers.
  • If the computer cannot boot into the desktop because of the Driver Verifier, you can disable the diagnostic tool by starting in Safe mode.

Must check resources:

  1. Fix the computer randomly restarts
  2. Fix the Computer running slow problem

FAQs

  1. What is the solution to fix the 0x00000133 bug check?

This bug check issue is DPC_WATCHDOG_VIOLATION. To solve this issue, 

  • Perform a disk health check to scan the bug. 
  • Try updating the system’s files and restore them again. 
  • Scan the system completely for any virus or malware.
  1. How to fix DPC watchdog violation error windows 10?
  • Remove the external devices connected to the computer.
  • Update the SSD firmware to fix the bug check error.
  • Remove the recently installed software.
  • Search and scan for the hard disk errors and fix them.
  • Scan and fix the system files.
  1. How can the PC overheating be fixed?
  • Place the computer away from dust and clean the surfaces.
  • Always use a good quality power supply unit. 
  • Do not keep the computer in sleep mode, instead turn off the system if not using it for several hours. 
  • Never use the PC in high memory usage mode.
  • In the place where the system is placed the temperature must be below 20 degrees.
  1. Is there any solution if the BIOS update is stuck?
  • Restart the computer, or;
  • Press Ctrl+Alt+Del, or;
  • Try system restoring, or;
  • Try starting Windows in safe mode, or;
  • Starting the computer with advanced startup options.
administrator

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *